Your Deco device is often ready for setup or attempting to connect to the network if the blue Deco mesh light is blinking. If you see your deco flashing blue for an extended period of time, it can indicate that the setup is incomplete or that the device is having trouble connecting. The good news is that a few simple steps may typically resolve the problem.
- Verify that your primary Deco device is turned on and linked to the modem.
- Verify that every cable is firmly plugged in and undamaged.
- During setup, move the satellite Deco unit closer to the main Deco.
- If, after a few minutes, the Deco mesh blue light continues to flicker, restart the Deco unit.
- Check to see if the device shows up during setup by opening the Deco app.
- When adding a new Deco, make sure your phone has Bluetooth and location enabled.
- Before beginning the setup, make sure your phone is connected to the appropriate Wi-Fi network.
- To improve compatibility, update the Deco app to the most recent version.
- Reset the impacted Deco unit by holding down the Reset button for a short while if the blue flashing continues.
- Before attempting the setup again, wait until the light begins to flicker blue once more.
- The Deco unit should be kept away from large metal objects, thick walls, and potentially interfering electronic equipment.
- Before pairing the Deco device, make sure your internet connection is operational.
- After the setup is finished, install the most recent firmware updates.
- Remove the device from the network and reconnect it if the Deco mesh blue light continues to flicker.
- If the issue persists after attempting every solution, get in touch with TP-Link support.
Deco mesh blue light blinking is typically a part of the setup procedure, however if a deco flashes blue for an extended period of time, something needs to be fixed. Your Deco mesh system should be connected and functioning properly in no time if you follow these easy procedures.Explore our website to know more.
